Posts tagged: Repairs

Partially Homeless…

By , June 1, 2010 5:33 pm

RMTC

What you’re seeing is a picture of my office for the next few days…  actually, it’s the drivers lounge at a Freightliner repair shop I’m at.  I may be spending a fair bit of time here.

On the way to Yellowstone, our ABS light came on.  When driving a 30,000 pound RV with a Jeep and motorcycle attached to it on mountain roads with potential snow, I want my ABS system to work!  So, I’m at a Freightliner dealer getting a few things fixed.  I don’t know how long I’ll be here yet, as they haven’t given me an idea of what’s going on yet.  The RV has been plugged into computers for most of the day and heads have been disappearing into various engine bays and hatches every time I’ve looked. 

Unfortunately, all the Yellowstone pictures are on the big computer in the RV, so I can’t finish my entries until I can get plugged back in somewhere. :(  I might be able to get the computer up sometime tonight to transfer all the pictures to my little laptop.  If so, I’ll be spending some quality time typing at a local coffee shop somewhere. 

Unfortunately, that’s a little difficult…  I managed to slice my knuckle open this morning when I was clearing out the RV for the workers.  It’s not quite bad enough for stitches, but it’s close…  it’s my own fault, I wasn’t paying attention when I was cutting something. 

Dasy went back to Northern Virginia for a bit, mostly to visit friends, so we figured this would be the best time to get all our maintenance done.  Hopefully, I’ll be all healed up and we’ll have a lot of things fixed on the Star when she gets back. 😉

Homeless again…

By , December 7, 2009 12:07 pm

We knew that there would be some minor repairs needed on any used RV we got.  The Dutch Star is living up to expectation and we just dropped it off at the local shop so they can get started on it.

The main thing we’d originally planned on was having the original roof vents replaced with MaxxAir Turbo/Maxx fans (with thermostat), which we got a sweet deal on earlier when we were in the evil rental. 

What we didn’t exactly plan on was fixing a leak.  A day or two after we got the Star, we had torrential rains for two days.  Water was dripping out of the roof vents near the windshield and our dashboard ended up pretty much getting soaked.  I did a little investigating on the roof and suspected that the front roof running/parking lights were the culprit.  The roof itself and all the seals there looked good.  The lights had cracked caulking and backing pads, some of which were broken down enough that I could see into the light assembly.  To be sure I was right, we taped some plastic sheeting over the lights for a couple days.  Last night, we had another good rain and there were no signs of any water inside.  Success!  :)  So, we’re having the lights replaced.  For good measure, I’m getting the rear ones done as well, since they don’t look much better. 

DutchStarPlastic

Here you can see my extremely professional job of taping the plastic sheeting down. ;)  For those who attempt this on their own rigs, here are a few tips…

  • Leave a space with the tape at the bottom of the plastic sheeting.  If any water does manage to get into the sheeting, it need a space to run back out, otherwise you will end up with a water balloon until it gets to the level of your lights.  It’ll then all come into your lights, down your windshield, onto your dashboard, etc.
  • Use painter’s masking tape.  3M makes a 2 inch wide “medium adhesion” masking tape that works perfectly.  If you use packing tape or something like that, you’re likely to either leave “sticky goo” behind when you remove it, or you will take some of your paint off with the tape. 
  • Replace it every three days of rain.  Masking tape will hold when it’s wet, but it’ll eventually fall off or allow the water to soak through.  Pull it off, wipe everything down and dry it well and slap on some new tape.
  • Don’t expect it to hold when you’re driving.  I shouldn’t need to explain that any further. 😛

We’re also having Dave install tire valve extensions on the rear tires so I can check the pressure without crawling around under the RV.  Finally, he’s going to re-tension the awning on our living room slide, as it’s sagging a bit and can get stuck when retracting the slide (that’s generally a bad thing).

After we get the Star back, we’ll have one more big piece of work to do…  new tires. :(  I was expecting this, but hoping I was wrong.  I was about to ask Dave (the repair guy) about the tires, but he beat me to it.  When walking around the RV to check a couple other items, he said “Dude, get those tires replaced”.  When we get it back, I’ll take some pictures of the tires before we head to the shop for new ones and will explain what to look for then.

Our stay at Pocahontas State Park

By , November 3, 2009 12:26 pm

Note: This was a little over a week ago, we’re catching up on the posts. 😉

IMG_0143.jpgWe uploaded another review of one of the places we stayed, Pocahontas State Park (PSP).  You can find it and all of our place review under the Parks and Places menu above.  There’s a handful of pictures there, but the full set is available on our Flickr page.IMG_0144.jpg

We arrived on a Friday and settled in for a long weekend.  It’s a nice park with good camping facilities and we enjoyed ourselves.  On Saturday, Rany (Dasy’s sister) and her husband, Seth, came out to join us for dinner.  I procured a nice set of steaks and corn on the cob from the local grocery store and we had our first attempt at grilling our dinner.  It rained on and off, so I ended up making a shield of sorts out of tin foil.  It actually worked out really well and the steak turned out fantastic.  The corn could have used a little longer on the grill, but it was still good. 

We stayed outside under our awning talking about friends, family and our upcoming adventures.  All in all, it was a good time and we thoroughly enjoyed our first attempts at “entertaining” in our new home. ;)  It’s a bit small inside, but with the awning and good weather it works out great.

IMG_0141.jpgWe were at PSP for the weekend and planned to leave on Monday.  We got a call on Sunday, however, that one of Dasy’s cousins wanted to buy her car, which we had taken with us and planned to keep in Florida.  So, we extended our stay for another day.  Dasy drove the car to her parents back in Northern Virginia, while I ran some errands and then went up in the Jeep to retrieve her.

Unfortunately, the Jeep decided not to cooperate.  I noticed while driving up I-95 that it was wobbling quite a bit and I frequently had to “over-steer” to correct it’s path.  I’ve had this happen before and am fairly familiar with the cause.  I pulled into a Pilot truck stop to check it out and found I was correct in my assumption…  The main bolt that connects the drag link to the frame had loosened a bit and was allowing the front axle to wander back and forth a little bit.  IMG_0122.jpg

Since all my tools are in storage, I sent a quick email from my cell phone to a bunch of my off-road buddies in Off-Camber Crawlers and continued on my way.  10 minutes later, I had several offers of help from fellow members with tools and garages. :)  I made it without incident to Ed’s place and he promptly went at it with an impact gun and some loctite.  That fixed it right up!  I continued to Dasy’s parents place, had some food and some internet access and we headed back to our “home”, minus one car. 🙂

The next morning, we did some minor exploring of the park, then headed south.

 

 

IMG_0114.jpgIMG_0133.jpgIMG_0140.jpg

Panorama Theme by Themocracy